Methods Strains and Growth Medium Bacterial strains used in this study were as follows: Clostridium cellulolyticum H10 (ATCC 35319), Desulfovibrio vulgaris subsp. vulgaris Hildenborough NCIMB 8303 [49], and Geobacter sulfurreducens [50]. B3M medium as described by Stolyar et al. 2007 [15] was modified to support the growth of C. cellulolyticum and called B3A. Notably, the buffering agent was changed to 3-(n-morpholino)propanesulfonic acid (MOPS) due to its greater buffering capacity to cope with the fermentation by C. cellulolyticum and eliminate the need for continuous pH adjustment of the cultures.

B3A medium contained (per liter) 3 g NaCl, 0.5 g MgCl2·6H2O, STA-9090 1 g NH4Cl, 0.1 g KCl, 2 g 3-(n-morpholino)propanesulfonic acid (MOPS), and 0.2 mg resazurine added to milli-Q water. The pH was adjusted to 7.2 prior to autoclaving. The following compounds were added from stock solutions after autoclaving to the final concentration shown:

0.2 nM L-alanine, 1 mM CaCl2, 2.2 mM cellobiose, 0.2% cysteine, 5 mM fumarate, 5 mM NaHCO3, 8 mM Na2SO4, and 10 mM K2HPO4. 2 ml per liter of a vitamin solution (containing per liter 0.02 g biotin, 0.02 g folic acid, 0.1 g pyridoxine HCl, 0.05 g thiamine HCl, 0.05 g riboflavin, Belinostat datasheet 0.05 g nicotinic acid, 0.05 g calcium pantothenate, 0.05 g p-aminobenzoic acid, 0.01 g vitamin B12, 0.05 g thioctic acid), and 1

ml per liter of a trace minerals solution (containing per liter 0.2 g FeCl2·4H2O, 0.1 g MnCl2·4H2O, 0.1 g CoCl2·2H2O, 0.05 g ZnCl2, 0.01 g Na2MoO4, 0.005 g H3BO3, 0.024 g NiCl2·6H2O, 0.002 g CuCl2·2H2O, 0.017 g Na2SeO3·5H2O, 0.020 g Na2WO4·2H2O, 1.5 g nitrilotriacetic acid, 0.1 g MgCl2·6H2O, 1 g CaCl2·2H2O) was also added after autoclaving. Reactor Operation Two replicate custom built anaerobic glass fermentation vessels (Allen Ribose-5-phosphate isomerase Glass, Boulder, CO) with working volumes of approximately 650 ml were filled with B3A medium (Figure 1). The fermentation vessels were fed medium from the same carboy by individual peristaltic pumps set to deliver media at a flow rate of 0.34 ml min-1 (Figure 1) which was equivalent to a dilution rate of 0.03 h-1. The headspace of the 19 L carboy was flushed with N2 at ~10 ml min-1 keeping an inert blanket over the medium. Each fermentation vessel was constantly stirred via a magnetic stir bar and anaerobic conditions were maintained by a constant flow of nitrogen gas (49 ml min-1) through the medium inlet tube. Sparging the inlet drip-tube Poziotinib clinical trial proved instrumental in reducing biofilm development in the medium dispensing system and allowed for the prevention of microbial contamination in the sterile medium carboy over four of weeks of operation.